Brand: Wood Valley Works
Part Number: RA-WA-011
A small batch of six wooden coal wagons were built at Coed-y-Parc and delivered to the quarry in 1856-7. The very distinctive beam along each side was to allow a plank to be propped there so a wheelbarrow could be pushed up for loading and unloading as no doors were fitted.Supplied as a complete kit..
£22.00
Brand: Wood Valley Works
Part Number: RA-CO-006
Used for transporting quarrymen from Port Penrhyn to the quarry near Bethesda the railway operated a number of these simple 4 wheel open unsprung carriages, which had been constructed between 1879 and 1927.The carriage is 188mm long, 84mm wide and 74mm high (plus 18mm for the brake handle..
£32.00
Brand: Wood Valley Works
Part Number: RA-HB-010
Add a bit of weight to your models with these plated iron weights. They are in pre-cut 5 gram and 10 gram sections with a strong adhesive backing, giving a total of 60 grams for the strip...
£0.50
Brand: Wood Valley Works
Part Number: RA-CL-001
Laser cut clock face with a picture of a Quarry Hunslet Steam locomotive.This clock uses a good quality continuous (None Tick) battery movement and is supplied complete with Hour, Minute and Seconds Hands.Please Note: The hands are not fitted to save any damage in transit, they simply push on, hour ..
£12.00
Brand: Wood Valley Works
Part Number: RA-PL-001
An illuminated plaque with a picture of a Quarry Hunslet on a LED colour changing base.This will be ideal for a man cave or better still as a night light for a childs bedroom, after all what better way to get them interested in railways from an early age.Either USB powered or by 3 x AA batterys ..
£20.00
Brand: Wood Valley Works
Part Number: RA-HB-003
A pair of 3D printed replacement Con-Rods to fit the plastic version of the IP Engineering Delux Chassis...
£3.00
Brand: Wood Valley Works
Part Number: RA-WA-005
Rubbish wagons were used almost exclusively within slate quarries. They transported waste slate from the mills to the dumps. Some were fitted with hook-eyes to enable them to be carried by a "Blondin" aerial cable system. Available with inside or outside frames. 98mm Long x 53mm Wide x 46mm High and..
£12.00
Brand: Wood Valley Works
Part Number: RA-WA-001
Runner wagons were used in the quarry between the locomotive and the first slab wagon to stop the slate load hitting the locomotive, it was also used for storing tools etc. 84mm Long x 52mm Wide x 30mm High.This kit is supplied without brass axle bearings but they are available with replac..
£8.00
2-3 Days
Brand: Wood Valley Works
Part Number: RA-BV-002
Penrhyn railway brake van "Sanford"This model depicts Sanford in it's latest incarnation with the water tank removed and an extended chassis with a large box containing scrap iron and concrete ballast.The kit is supplied with:-WheelsAxlesBronze BearingsBuffers3D Printed Detailing PartsWindow Glazing..
£50.00
Brand: Wood Valley Works
Part Number: RA-HB-007
Coach end / side single seats. Pack of 2Made from 3mm MDFSeat size is (Seat width option) wide x 22mm deep x 38mm high. Different widths of seat are available upon request via Contact Form.Prices for different seat widths:-Less than 99mm width £3.00 per pair100mm to 199mm width £4.00 per pair200mm t..
£3.00
Brand: Wood Valley Works
Part Number: RA-WA-003
Slab wagons were designed to carry large uncut slabs of slate, the slab is laid horizontally on wooden runners and chained to the wagon. 168mm Long x 52mm Wide x 27mm High.This kit is supplied without brass axle bearings but they are available with replacement axle boxes as an option.Download t..
£9.00
Brand: Wood Valley Works
Part Number: RA-WA-004
Slate wagons are the basic vehicle for transporting roofing slates from the quarry to the destination. As roofing slates are relatively fragile, they were packed vertically into the open slate wagons to reduce the chance that they will be broken in transit. Early designs, like this one, us..
£10.00