Brand: Wood Valley Works
Part Number: RA-WA-010
Part of my Wandering Star freelance range of rolling stock. Mitchum is a short open wagon measuring 152mm long (165mm over buffers) by 84mm wide and 70mm high above the rails with an 80mm wheelbase.Complete with 3D printed detailing parts, an optional coal load is availible.Download the build i..
£25.00
Brand: Wood Valley Works
Part Number: RA-WA-011
A small batch of six wooden coal wagons were built at Coed-y-Parc and delivered to the quarry in 1856-7. The very distinctive beam along each side was to allow a plank to be propped there so a wheelbarrow could be pushed up for loading and unloading as no doors were fitted.Supplied as a complete kit..
£22.00
Brand: Wood Valley Works
Part Number: RA-HB-010
Add a bit of weight to your models with these plated iron weights. They are in pre-cut 5 gram and 10 gram sections with a strong adhesive backing, giving a total of 60 grams for the strip...
£0.50
Brand: Wood Valley Works
Part Number: RA-CL-001
Laser cut clock face with a picture of a Quarry Hunslet Steam locomotive.This clock uses a good quality continuous (None Tick) battery movement and is supplied complete with Hour, Minute and Seconds Hands.Please Note: The hands are not fitted to save any damage in transit, they simply push on, hour ..
£12.00
Brand: Wood Valley Works
Part Number: RA-HB-003
A pair of 3D printed replacement Con-Rods to fit the plastic version of the IP Engineering Delux Chassis...
£3.00
Brand: Wood Valley Works
Part Number: RA-WA-005
Rubbish wagons were used almost exclusively within slate quarries. They transported waste slate from the mills to the dumps. Some were fitted with hook-eyes to enable them to be carried by a "Blondin" aerial cable system. Available with inside or outside frames. 98mm Long x 53mm Wide x 46mm HighDown..
£12.00
Brand: Wood Valley Works
Part Number: RA-WA-001
Runner wagons were used in the quarry between the locomotive and the first slab wagon to stop the slate load hitting the locomotive, it was also used for storing tools etc. 84mm Long x 52mm Wide x 30mm High.This kit is supplied without brass axle bearings but they are available with replac..
£8.00
Brand: Wood Valley Works
Part Number: RA-BV-002
Penrhyn railway brake van "Sanford"This model depicts Sanford in it's latest incarnation with the water tank removed and an extended chassis with a large box containing scrap iron and concrete ballest.The kit is supplied with:-WheelsAxlesBronze BearingsBuffers3D Printed Detailing PartsWindow Glazing..
£50.00
Brand: Wood Valley Works
Part Number: RA-WA-003
Slab wagons were designed to carry large uncut slabs of slate, the slab is laid horizontally on wooden runners and chained to the wagon. 168mm Long x 52mm Wide x 27mm High.This kit is supplied without brass axle bearings but they are available with replacement axle boxes as an option.Download t..
£9.00
Brand: Wood Valley Works
Part Number: RA-WA-004
Slate wagons are the basic vehicle for transporting roofing slates from the quarry to the destination. As roofing slates are relatively fragile, they were packed vertically into the open slate wagons to reduce the chance that they will be broken in transit. Early designs, like this one, us..
£10.00