Brand: Wood Valley Works
Part Number: RA-HB-022
A set of 4 3D printed dummy (Non Working) wagon side hinged straps complete with rivet detail.Lengths Available:- 30mm long width 4mm (12mm at the hinge)50mm long width 4mm (12mm at the hinge)As these parts are made from ABS plastic, the surface / print lines can be smoothed by gently applying aceto..
£1.00
Brand: Wood Valley Works
Part Number: AR-ER-004
Coil holder to display the Eddystone 6 pin coils as used in the All World Two (AW-2) receiver.Made from clear acrylic and designed to take all 9 coils.(Please Note the Eddystone AW-2 and the Coils shown in the photos are for demonstration purposes only and are NOT part of the sale)..
£16.00
Brand: Wood Valley Works
Part Number: AR-ER-001
Reproduction main tuning dial as used on the Eddystone AW-2 and others3" diameter with a 1/2" centre hole and labelled 1 to 100Pack quantity 1..
£8.00
Brand: Wood Valley Works
Part Number: AR-ER-002
Reproduction front panel scales for the Band Set and Reaction controls as used on the Eddystone AW-2 and others1 3/4" diameter with either a 3/8" or 1/2" centre hole and labelled 1 to 10Pack quantity 2..
£6.00
Brand: Wood Valley Works
Part Number: RA-HB-023
A set of 4 3D printed wagon end angles complete with rivet detail left and right handed.Length 38mm width 4.5mm depth 4.5mmAs these parts are made from ABS plastic, the surface / print lines can be smoothed by gently applying acetone (nail varnish remover) with a cotton bud.Please note these parts c..
£2.00
Brand: Wood Valley Works
Part Number: RA-SN-002
A pair of oval side plaques for the Ffestiniog Quarryman's Coach. Size is 20mm x 14mm (Pack of 2).Different numbers are availible upon request via Contact Form.Please select which coach number you require...
£2.00
Brand: Wood Valley Works
Part Number: RA-HB-025
Ffestiniog Quarrymen's Coach Chassis with Inside Frames. Length 120mm (150mm over the bufers)Width 31mm (50mm including the axles)Height 30mmWheelbase 72mmWheel Dia. 24mmSM32 - 32mm Gauge OnlyThe kit includes wheels, brass bearings, axles and buffers.Different lengths of chassis and / or wheelbase a..
£10.00
Brand: Wood Valley Works
Part Number: RA-HB-026
Ffestiniog Quarrymen's Coach Chassis with Outside Frames. Length 165mm (185mm over the bufers)Width 57mmHeight 30mmWheelbase 86mmWheel Dia. 24mmSM32 - 32mm Gauge OnlyThe kit includes wheels, brass bearings, axles and buffers.Different lengths of chassis and / or wheelbase are available upon request&..
£12.00
Brand: Wood Valley Works
Part Number: RA-CO-001
The earliest type of quarrymen's coach were these open two-compartment vehicles which were built rather reluctantly by the FR when Captain Tyler refused to allow the quarrymen to be carried in slate wagons. There were 32 of these vehicles available for use in 1871.This is a complete kit, to scale an..
£12.00
Brand: Wood Valley Works
Part Number: RA-CO-002
From 1873 many of the type 1a were fitted with a timber upper superstructure providing doorways but no doors or windows. These are referred to as Type 1b, or sometimes as the Open Halfside coach. The evidence suggests that they had all gone, or at least had ceased to be used as quarrymen's cars, by ..
£26.00
Brand: Wood Valley Works
Part Number: RA-CO-003
Transporting quarrymen from Porthmadog to Blaenau Ffestiniog was an important part of the railway's traffic and was first served by basic four wheel vehicles more like a wagon than a coach. The type 2a had the luxury of a roof, with seating for 16 men and open doors.This is a complete kit, to scale ..
£25.00
Brand: Wood Valley Works
Part Number: RA-CO-004
Transporting quarrymen from Porthmadog to Blaenau Ffestiniog was an important part of the railway's traffic and was first served by basic four wheel vehicles more like a wagon than a coach. The type 2b had the luxury of a roof, glazed doors and with seating for 16 men.This is a complete kit, to scal..
£26.00