Menu
Your Cart

Quarry Wagons

A selection of small rolling stock typically found in and around the slate quarrys of North Wales.

All of these are 32mm gauge only.

Brand: Wood Valley Works Part Number: RA-HB-028
This is a kit to convert our standard range of quarry rolling stock to brass bearing axle boxes. The axle boxes are slightly larger than the standard ones to accomadate the flange on the brass bearing. The kit includes:-4 brass bearings4 replacement axle boxesAssemble by pressing the bearings in fro..
£1.00
Barrel Wagon Barrel Wagon
New Now Available
Brand: Wood Valley Works Part Number: RA-WA-022
Barrel wagon 106mm Long x 52mm Wide x 65mm High.This kit is supplied without brass axle bearings but they are available with replacement axle boxes as an option.Please Note: This kit consists of a quarry flat wagon RA-WA-002 and 2 white Oil Drums RA-WL-010, because of this I have only included ..
£14.00
Brand: Wood Valley Works Part Number: RA-WA-017
Bolster wagons were used as a pair to carry long loads with either a chain or a draw bar coupling the wagons together.Sold as a pair of wagons they are each 106mm Long x 52mm Wide x 70mm High.This kit is supplied without brass axle bearings but they are available with replacement axle boxes as an op..
£22.00
Brand: Wood Valley Works Part Number: RA-WA-015
Coal wagons were used in the quarry to transport fuel for the locomotives and workshops. 115mm Long x 62mm Wide x 57mm High Available with optional coal load made from cast resin. (will require painting)This kit is supplied without brass axle bearings but they are available with replacement axl..
£10.00
Brand: Wood Valley Works Part Number: RA-WA-002
Flat wagons were general purpose wagons used in the quarry to transport anything that needed moving such as tools, machinery, fuel etc. 106mm Long x 52mm Wide x 27mm High.This kit is supplied without brass axle bearings but they are available with replacement axle boxes as an opt..
£8.00
Brand: Wood Valley Works Part Number: RA-WA-014
Man Riders were used in the quarries to transport the workmen around the quarry levels. 168mm Long x 52mm Wide x 48mm High.This kit is supplied without brass axle bearings but they are available with replacement axle boxes as an option.Download the build instructions..
£9.00
Brand: Wood Valley Works Part Number: RA-WA-005
Rubbish wagons were used almost exclusively within slate quarries. They transported waste slate from the mills to the dumps. Some were fitted with hook-eyes to enable them to be carried by a "Blondin" aerial cable system. Available with inside or outside frames. 98mm Long x 53mm Wide x 46mm High and..
£12.00
Brand: Wood Valley Works Part Number: RA-WA-001
Runner wagons were used in the quarry between the locomotive and the first slab wagon to stop the slate load hitting the locomotive, it was also used for storing tools etc. 84mm Long x 52mm Wide x 30mm High.This kit is supplied without brass axle bearings but they are available with replac..
£8.00
Brand: Wood Valley Works Part Number: RA-WA-003
Slab wagons were designed to carry large uncut slabs of slate, the slab is laid horizontally on wooden runners and chained to the wagon. 168mm Long x 52mm Wide x 27mm High.This kit is supplied without brass axle bearings but they are available with replacement axle boxes as an option.Download t..
£9.00
Brand: Wood Valley Works Part Number: RA-WA-004
Slate wagons are the basic vehicle for transporting roofing slates from the quarry to the destination. As roofing slates are relatively fragile, they were packed vertically into the open slate wagons to reduce the chance that they will be broken in transit. Early designs, like this one, us..
£10.00
Brand: Wood Valley Works Part Number: RA-WA-013
Slate wagons are the basic vehicle for transporting roofing slates from the quarry to the destination. As roofing slates are relatively fragile, they were packed vertically into the open slate wagons to reduce the chance that they will be broken in transit. This model depicts the later des..
£10.00
Tank Wagon Tank Wagon
New Now Available
Brand: Wood Valley Works Part Number: RA-WA-018
Tank wagon 106mm Long x 52mm Wide x 75mm High.This kit is supplied without brass axle bearings but they are available with replacement axle boxes as an option.Please Note: This kit consists of a quarry flat wagon RA-WA-002 and a Tank with lid RA-WL-011, because of this I have only included the build..
£16.00
Showing 1 to 12 of 13 (2 Pages)

Strictly Required Cookies

These cookies are required for the website to run and cannot be switched off.

Analytics & Statics

These cookies are usually set by our marketing and advertising partners.

Marketing and Retargeting

These cookies allow us to measure visitors traffic and see traffic sources by collecting information in data sets.